Difference between revisions of "Découpeuse de bouteille plastique/en"

(Mise à jour pour être en accord avec la nouvelle version de la source de la page)
(Mise à jour pour être en accord avec la nouvelle version de la source de la page)
 
Line 1: Line 1:
 
{{ {{tntn|Tuto Details}}
 
{{ {{tntn|Tuto Details}}
|SourceLanguage=fr
 
|Language=en
 
|IsTranslation=1
 
 
|Main_Picture=D_coupeuse_de_bouteille_plastique_rouet_plastique.png
 
|Main_Picture=D_coupeuse_de_bouteille_plastique_rouet_plastique.png
 
|Licences=Attribution-ShareAlike (CC BY-SA)
 
|Licences=Attribution-ShareAlike (CC BY-SA)
Line 41: Line 38:
 
* Scissors
 
* Scissors
 
}}
 
}}
{{ {{tntn|Separator}}}}
 
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_syst_me_fini.png
 
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_syst_me_fini_2.png
 
|Step_Picture_02=D_coupeuse_de_bouteille_plastique_syst_me_fini_3.png
 
 
|Step_Title=Operation
 
|Step_Title=Operation
 
|Step_Content=Drill two holes in the board. In these two holes are bolted bolts, around which are inserted washers. A cutter blade is disposed between the washers.
 
|Step_Content=Drill two holes in the board. In these two holes are bolted bolts, around which are inserted washers. A cutter blade is disposed between the washers.
Line 52: Line 45:
  
 
On the system used here, the dimensions are slightly different. The manufacturing remains exactly the same, but the dimensions given in this tutorial are optimized compared to those shown in the photos.
 
On the system used here, the dimensions are slightly different. The manufacturing remains exactly the same, but the dimensions given in this tutorial are optimized compared to those shown in the photos.
 +
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_syst_me_fini.png
 +
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_syst_me_fini_2.png
 +
|Step_Picture_02=D_coupeuse_de_bouteille_plastique_syst_me_fini_3.png
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_marque_trous.png
 
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_per_age.png
 
|Step_Picture_02=D_coupeuse_de_bouteille_plastique_per_age_2.png
 
 
|Step_Title=Board drilling
 
|Step_Title=Board drilling
 
|Step_Content=* At about 5 cm from the top edge of the board, mark the location of two holes spaced by 4cm;
 
|Step_Content=* At about 5 cm from the top edge of the board, mark the location of two holes spaced by 4cm;
  
 
* Dril two holes where indicated with the 5mm drill bit
 
* Dril two holes where indicated with the 5mm drill bit
 +
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_marque_trous.png
 +
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_per_age.png
 +
|Step_Picture_02=D_coupeuse_de_bouteille_plastique_per_age_2.png
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 +
|Step_Title=Nuts, bolt and washers
 +
|Step_Content=* Insert the screws into the holes;
 +
* File 6 washers on each screw;
 +
* Pre-screw the nuts on the screws.
 
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_boulons.png
 
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_boulons.png
 
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_rondelles.png
 
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_rondelles.png
 
|Step_Picture_02=D_coupeuse_de_bouteille_plastique_rondelles_2.png
 
|Step_Picture_02=D_coupeuse_de_bouteille_plastique_rondelles_2.png
 
|Step_Picture_03=D_coupeuse_de_bouteille_plastique_ecrous.png
 
|Step_Picture_03=D_coupeuse_de_bouteille_plastique_ecrous.png
|Step_Title=Nuts, bolt and washers
 
|Step_Content=* Insert the screws into the holes;
 
* File 6 washers on each screw;
 
* Pre-screw the nuts on the screws.
 
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_lame.png
 
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_lame_2.png
 
 
|Step_Title=Cutter blade
 
|Step_Title=Cutter blade
 
|Step_Content=Using a clamp (safety requires), insert the cutter blade between the washers at the same height on each side.
 
|Step_Content=Using a clamp (safety requires), insert the cutter blade between the washers at the same height on each side.
  
 
The sharpened side of the bladeis in front of the short side of the board.
 
The sharpened side of the bladeis in front of the short side of the board.
 +
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_lame.png
 +
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_lame_2.png
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_serrage.png
 
 
|Step_Title=Tightenning
 
|Step_Title=Tightenning
 
|Step_Content=Using the flat screwdriver and the socket wrench, tighten the nuts on the bolts.
 
|Step_Content=Using the flat screwdriver and the socket wrench, tighten the nuts on the bolts.
Line 88: Line 83:
  
 
the bottle cutter is ready!
 
the bottle cutter is ready!
 +
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_serrage.png
 
}}
 
}}
 
{{ {{tntn|Tuto Step}}
 
{{ {{tntn|Tuto Step}}
 +
|Step_Title=Use
 +
|Step_Content=For optimal cutting of PET bottles, remove the bottom of the bottle.
 +
 +
Pre-cut a thin plastic strip at the bottom of the bottle (corresponding to the spacing between the cutter blade and the board).
 +
 +
Insert the thin strip between the cutter blade and the board. Applying slight pressure on the neck of the bottle with one hand, pull the plastic slide with the other hand. With a little practice, it is possible to make a big yarn with the whole bottle.
 
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_d_coupe_fond_bouteille.png
 
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_d_coupe_fond_bouteille.png
 
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_pr_d_coupe.png
 
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_pr_d_coupe.png
Line 96: Line 98:
 
|Step_Picture_04=D_coupeuse_de_bouteille_plastique_d_coupe_plastique_2.png
 
|Step_Picture_04=D_coupeuse_de_bouteille_plastique_d_coupe_plastique_2.png
 
|Step_Picture_05=D_coupeuse_de_bouteille_plastique_fil_plastique.png
 
|Step_Picture_05=D_coupeuse_de_bouteille_plastique_fil_plastique.png
|Step_Title=Use
+
}}
|Step_Content=For optimal cutting of PET bottles, remove the bottom of the bottle.
+
{{ {{tntn|Tuto Step}}
 +
|Step_Title=Applications
 +
|Step_Content=This yarn is very useful for making objects of all kinds. When heated, the wire retracts and offers a very satisfactory resistance.
  
Pre-cut a thin plastic strip at the bottom of the bottle (corresponding to the spacing between the cutter blade and the board).
+
On the boat, the crew of Nomade des Mers and its partners made all sorts of objects thanks to the plastic yarn: parts of the fridge without energy Pimp my Fridge, low-tech crutch ...
  
Insert the thin strip between the cutter blade and the board. Applying slight pressure on the neck of the bottle with one hand, pull the plastic slide with the other hand. With a little practice, it is possible to make a big yarn with the whole bottle.
+
Opposite the manufacture of a crutch. Plastic offers sufficient strength to support the weight of a man.
}}
 
{{ {{tntn|Tuto Step}}
 
 
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_utilisation.png
 
|Step_Picture_00=D_coupeuse_de_bouteille_plastique_utilisation.png
 
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_utilisation2.png
 
|Step_Picture_01=D_coupeuse_de_bouteille_plastique_utilisation2.png
Line 110: Line 112:
 
|Step_Picture_04=D_coupeuse_de_bouteille_plastique_utilisation5.png
 
|Step_Picture_04=D_coupeuse_de_bouteille_plastique_utilisation5.png
 
|Step_Picture_05=D_coupeuse_de_bouteille_plastique_b_quille.png
 
|Step_Picture_05=D_coupeuse_de_bouteille_plastique_b_quille.png
|Step_Title=Applications
 
|Step_Content=This yarn is very useful for making objects of all kinds. When heated, the wire retracts and offers a very satisfactory resistance.
 
 
On the boat, the crew of Nomade des Mers and its partners made all sorts of objects thanks to the plastic yarn: parts of the fridge without energy Pimp my Fridge, low-tech crutch ...
 
 
Opposite the manufacture of a crutch. Plastic offers sufficient strength to support the weight of a man.
 
 
}}
 
}}
 
{{ {{tntn|Notes}}
 
{{ {{tntn|Notes}}
Line 127: Line 123:
 
Feel free to comment, share, and enhance the tutorial information useful for its improvement.
 
Feel free to comment, share, and enhance the tutorial information useful for its improvement.
  
 +
<div class="mw-translate-fuzzy">
 
Check out the Low-tech Lab's [http://lowtechlab.org/biblilowtech/ Biblilowtech] !
 
Check out the Low-tech Lab's [http://lowtechlab.org/biblilowtech/ Biblilowtech] !
 +
</div>
 
}}
 
}}
 
{{ {{tntn|Tuto Status}}
 
{{ {{tntn|Tuto Status}}
 
|Complete=Published
 
|Complete=Published
 
}}
 
}}
 +
{{ {{tntn|Separator}}}}

Latest revision as of 11:13, 8 August 2019

Tutorial de avatarLow-tech Lab | Categories : Tools

Make plastic yarn with a bottle cutter

License : Attribution-ShareAlike (CC BY-SA)

Introduction

Bottles have a significant impact on the environment. 89 billion bottles of plastic water are sold each year worldwide. The United States is the largest consumer of bottled water. The French are major exporters of bottled water. India and China have tripled and doubled their consumption between 2000 and 2005. For the example, according to the Worldwatch institute, which is an independent body, nearly 2 million tons of polyethylene terephthalate (PET) bottles end up in discharge each year in the United States.

In many countries of the world, channels of collection and recycling of these bottles have been set up. For example, Valorplast in France organizes the collection and recycling of these bottles, which are given a second life as pillows, duvets, cushions, pens ... Unfortunately many of them, especially in countries that do not have collection and recycling channels are still in circulation and pile up in open dumps or end up in the oceans. Even in France, where the sectors exist, less than 20% of plastics are recycled.

The crew of Nomade des Mers has discovered in Brazil how important the problem of plastic recycling is. PET, PVC, HDPE ... The types of plastic are numerous, almost all reusable or recyclable, but too few are.

A possible reuse of PET water bottles is the transformation into yarn. Thanks to a very simple tool to manufacture at low cost, it is possible to turn a PET bottle into a plastic yarn that can be used for all kinds of things, especially for making very strong connections. Chairs, crutches, trolleys, tables, tools ... This plastic yarn is a very useful resource and currently almost inexhaustible.

Materials

  • A wood board ep. 10mm x L. 20cm x l. 15cm
  • A cutter blade
  • Two bolts L. 50mm x D. 5mm
  • 12 washers diameter 5mm

Tools

  • A drill
  • A 5 mm drill bit
  • Two carpenter's clamps
  • A clamp
  • A flat screwdriver
  • A socket wrench
  • Scissors

Step 1 - Operation

Drill two holes in the board. In these two holes are bolted bolts, around which are inserted washers. A cutter blade is disposed between the washers.

With this device, we can cut plastic bottles to transform them into yarn of adjustable thickness (the thickness of the yarn is modified with the height of the cutter blade).

On the system used here, the dimensions are slightly different. The manufacturing remains exactly the same, but the dimensions given in this tutorial are optimized compared to those shown in the photos.


Step 2 - Board drilling

  • At about 5 cm from the top edge of the board, mark the location of two holes spaced by 4cm;
  • Dril two holes where indicated with the 5mm drill bit


Step 3 - Nuts, bolt and washers

  • Insert the screws into the holes;
  • File 6 washers on each screw;
  • Pre-screw the nuts on the screws.

Step 4 - Cutter blade

Using a clamp (safety requires), insert the cutter blade between the washers at the same height on each side.

The sharpened side of the bladeis in front of the short side of the board.


Step 5 - Tightenning

Using the flat screwdriver and the socket wrench, tighten the nuts on the bolts.

Squeeze tight so that the blade does not move.

the bottle cutter is ready!



Step 6 - Use

For optimal cutting of PET bottles, remove the bottom of the bottle.

Pre-cut a thin plastic strip at the bottom of the bottle (corresponding to the spacing between the cutter blade and the board).

Insert the thin strip between the cutter blade and the board. Applying slight pressure on the neck of the bottle with one hand, pull the plastic slide with the other hand. With a little practice, it is possible to make a big yarn with the whole bottle.

Step 7 - Applications

This yarn is very useful for making objects of all kinds. When heated, the wire retracts and offers a very satisfactory resistance.

On the boat, the crew of Nomade des Mers and its partners made all sorts of objects thanks to the plastic yarn: parts of the fridge without energy Pimp my Fridge, low-tech crutch ...

Opposite the manufacture of a crutch. Plastic offers sufficient strength to support the weight of a man.

Notes and references

This low-tech was inspired by the work of many DIYers, especially on YouTube.

sources: http://www.utsumi.com.br/pet/English/filetador/index.html

https://www.youtube.com/watch?v=hQeeJEpBYsg

Feel free to comment, share, and enhance the tutorial information useful for its improvement.

Check out the Low-tech Lab's Biblilowtech !

Comments

Published